channel-load-mode indoor

Function

The channel-load-mode indoor command sets the AP channel mode to indoor mode.

The undo channel-load-mode indoor command restores the AP channel mode to outdoor mode.

The default channel mode of an AP is outdoor mode.

Format

channel-load-mode indoor

undo channel-load-mode indoor

Parameters

None

Views

Regulatory domain profile view

Default Level

2: Configuration level

Usage Guidelines

In scenarios where indoor and outdoor boundaries are unclear, such as subway and train platforms, it is recommended that outdoor APs be deployed. When a large volume of data is transmitted, outdoor APs in outdoor channel mode have no sufficient channels to meet data transmission requirements. In this case, you can run the channel-load-mode indoor command to set the channel mode of the APs to indoor mode, so that data can be transmitted on more channels.

Precautions

The AP is automatically reset after this command is executed, so exercise caution when using this command.

This function is supported only by the AP8030DN, AP8130DN, AP8050TN-HD, AP8050DN, AP8150DN, AP8050DN-S, AP8082DN, AP8182DN.

Example

# Set the AP channel mode to indoor mode.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan] regulatory-domain-profile name default
[HUAWEI-wlan-regulate-domain-default] channel-load-mode indoor
Warning: Modifying the channel set mode may delete channels of AP radios in this
 domain and restart the AP. Continue?[Y/N]:y