< Home

calibrate auto-channel-select

Function

The calibrate auto-channel-select { enable | disable } command enables or disables automatic channel selection.

The undo calibrate auto-channel-select command restores the automatic channel selection state.

By default, the automatic channel selection function is enabled in the AP group radio view and not configured in the AP radio view.

Format

calibrate auto-channel-select { enable | disable }

undo calibrate auto-channel-select

Parameters

None

Views

AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

Two channel selection modes are available:
  • Automatic mode (enabling automatic channel selection): An AP automatically selects a proper channel based on the WLAN radio environment, removing the need to specify channels manually.
  • Fixed mode (disabling automatic channel selection): Channels must be manually specified.

The automatic mode (automatic channel selection) is recommended because you do not need to specify a channel for each radio. The fixed mode provides users with an alternative way when they want to specify channels by themselves or to avoid frequent channel adjustment (this may cause intermittent service interruption).

If an AP needs radio calibration, automatic channel selection must be enabled.

When automatic channel selection is enabled, the manually configured channels do not take effect to ensure that the radio works in the optimal channel environment.

Example

# Disable automatic channel selection.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name default
[HUAWEI-wlan-ap-group-ap-group1] radio 0
[HUAWEI-wlan-group-radio-ap-group1/0] calibrate auto-channel-select disable
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >