calibrate auto-txpower-select

Function

The calibrate auto-txpower-select { enable | disable } command enables or disables automatic transmit power selection.

The undo calibrate auto-txpower-select command restores the automatic transmit power selection state.

By default, the automatic transmit power selection function is enabled in the AP group radio view and not configured in the AP radio view.

Format

calibrate auto-txpower-select { enable | disable }

undo calibrate auto-txpower-select

Parameters

Parameter	Description	Value
enable	Enables the automatic transmit power selection function.	-
disable	Disables the automatic transmit power selection function.	-

Views

AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

Two power selection modes are available:

Automatic mode (enabling automatic transmit power selection): An AP automatically selects or adjusts the transmit power based on the WLAN radio environment, removing the need to specify AP power manually.
Fixed mode (disabling automatic transmit power selection): The transmit power must be manually specified.

If an AP needs radio calibration, automatic transmit power selection must be enabled.

Example

# Disable automatic transmit power selection.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name default
[HUAWEI-wlan-ap-group-ap-group1] radio 0
[HUAWEI-wlan-group-radio-ap-group1/0] calibrate auto-txpower-select disable