cellular-network-profile

Function

The cellular-network-profile command creates a cellular network profile or displays the view of an existing cellular network profile.

The undo cellular-network-profile command deletes a cellular network profile.

By default, no cellular network profile exists in the system.

Format

cellular-network-profile name profile-name

undo cellular-network-profile { name profile-name | all }

Parameters

Parameter	Description	Value
name profile-name	Specifies the name of a cellular network profile.	The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").
all	Delete all cellular network profiles.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure Hotspot 2.0 services on cellular networks. When connecting to the networks, user terminals can obtain network information from APs, which helps them to select desired networks.

Follow-up Procedure

Run the plmn-id command to configure the PLMN identifier and run the cellular-network-profile (Hotspot2.0 profile view) command to bind the cellular network profile to a Hotspot2.0 profile to make the cellular network profile take effect.

Example

# Create the cellular network profile cellular-network-profile1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] cellular-network-profile name cellular-network-profile1
[HUAWEI-wlan-cellular-net-cellular-network-profile1]