cellular-network-profile (Hotspot2.0 profile view)

Function

The cellular-network-profile command binds a cellular network profile to a Hotspot2.0 profile.

The undo cellular-network-profile command unbinds a cellular network profile from a Hotspot2.0 profile.

By default, no cellular network profile is bound to a Hotspot2.0 profile.

Format

cellular-network-profile profile-name

undo cellular-network-profile

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a cellular network profile.	The cellular network profile must exist.

Views

Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure Hotspot 2.0 services on a cellular network. When connecting to the network, user terminals need to obtain the cellular network identifier (3GPP Cellular PLMN) from APs to select desired networks. You can run the cellular-network-profile command to create a cellular network profile and the plmn-id command to configure the Public Land Mobile Network (PLMN) identifier of the network operator, and then bind the cellular network profile to a Hotspot 2.0 profile to make the configuration take effect.

Example

# Bind cellular network profile cellular-network-profile1 to the Hotspot 2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] cellular-network-profile cellular-network-profile1