redirected-controller ip-address

Function

The redirected-controller ip-address command configures the redirection IP address and port number of iMaster NCE-Campus.

The undo redirected-controller ip-address command deletes the redirection IP address and port number of iMaster NCE-Campus.

By default, no redirection IP address and port number are configured for iMaster NCE-Campus on a switch.

Format

redirected-controller ip-address ip-address port port-number

undo redirected-controller ip-address

Parameters

Parameter	Description	Value
ip-address	Specifies the redirection IP address.	The value is in dotted decimal notation.
port port-number	Specifies the redirection port number.	The value is an integer in the range 0 to 65535.

Views

NETCONF view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

In NETCONF Over SSH Callhome mode, after a switch passes registration authentication with iMaster NCE-Campus, the redirected iMaster NCE-Campus IP address and port number are configured on the iMaster NCE-Campus.

To ensure that the switch is able to use the redirected iMaster NCE-Campus configured on iMaster NCE-Campus after the switch restarts, you can configure the redirected iMaster NCE-Campus IP address and port number on the switch.

Precautions

The switch can obtain the address of iMaster NCE-Campus using different methods (listed in descending order of priority): from the redirection information of iMaster NCE-Campus configured on the switch, through DHCP, using commands, or in the registration query center.

Example

# Configure the redirection IP address and port number of iMaster NCE-Campus on the switch.

<HUAWEI> system-view
[HUAWEI] netconf
[HUAWEI-netconf] redirected-controller ip-address 10.1.1.2 port 10020