cts delay

Function

The cts delay command sets a delay for RUs to respond to STAs with CTS packets.

The undo cts delay command deletes the delay configured for RUs to respond to STAs with CTS packets.

By default, RUs respond to STAs with CTS packets with no delay.

Format

cts delay delay-time

undo cts delay

Parameters

Parameter	Description	Value
delay-time	Specifies the delay time after which RUs respond to STAs with CTS packets.	The value is an integer that ranges from 1 to 255, in microseconds.

Views

AP radio view, AP group radio view

Default Level

2: Configuration level

Usage Guidelines

After the undo cts disable command is executed to enable RUs to respond to STAs with CTS packets, you can configure a response delay. When multiple RUs respond to STAs with CTS packets, you can configure the delay for some RUs to prevent conflicts.

Example

# Set the delay for RUs to respond to STAs with CTS packets to 60 microseconds.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-id 1
[HUAWEI-wlan-ap-1] radio 0
[HUAWEI-wlan-radio-1/0] undo cts disable
[HUAWEI-wlan-radio-1/0] cts delay 60