cts disable

Function

The cts disable command disables RUs from responding to STAs with CTS packets.

The undo cts disable command enables RUs to respond to STAs with CTS packets.

By default, RUs are enabled to respond to STAs with CTS packets.

Format

cts disable

undo cts disable

Parameters

None

Views

AP radio view, AP group radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To prevent CTS conflicts in scenarios with densely deployed RUs, you can run the cts disable command to disable some RUs from responding to STAs with CTS packets. This configuration is recommended on a network enabled with agile distributed SFN roaming. In other scenarios, the default configuration is recommended.

Precautions

Disabling RUs from responding to STAs with CTS packets may cause STAs to go offline due to a failure to receive CTS packets.

Example

# Disable RUs from responding to STAs with CTS packets.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-id 1
[HUAWEI-wlan-ap-1] radio 0
[HUAWEI-wlan-radio-1/0] cts disable
Warning: This configuration is recommended in SFN roaming scenarios. This action
 may cause service interruption. Continue? [Y/N]y