Summary of EFM Configuration Tasks

After basic EFM functions are configured, EFM can work properly. To deploy special EFM functions such as link monitoring, remote loopback, remote fault indication, and EFM association, perform the configurations according to the following sections.

x-wc://file=EN-US_CONCEPT_0177110270.html#tab_dc_cfg_efm_003301 describes the EFM configuration tasks.

**Table 1** EFM configuration tasks
Task	Description	Link
Configure basic EFM functions	Basic EFM functions are used to monitor the link.	1.6-x-wc://file=en-us_task_0177110273.xml
Configure EFM link monitoring	After link monitoring is configured, network administrators can detect link layer faults in various environments and dynamically monitor link quality.	1.7-x-wc://file=en-us_task_0177110280.xml
Configure remote loopback	Remote loopback is used to test link connectivity and performance.	1.8-x-wc://file=en-us_task_0177110284.xml
Configure remote fault indication	Remote fault indication is used to detect remote device faults and monitor Ethernet performance.	1.9-x-wc://file=en-us_task_0177110294.xml
Configure EFM association	EFM can be associated with interfaces and detection protocols to quickly report link faults, ensuring service reliability.	1.10-x-wc://file=en-us_task_0177110298.xml