Setting the LACP System ID and LACP Priority of an E-Trunk

Procedure

1. Run system-view

   The system view is displayed.

2. Run lacp e-trunk system-id mac-address

   The LACP system ID is set for the E-Trunk.

   By default, the MAC address of an Ethernet interface is used as the LACP system ID.

   The master and backup devices in an E-Trunk must use the same LACP system ID.

3. Run lacp e-trunk priority priority

   The LACP priority of an E-Trunk member is set.

   By default, the LACP priority of an E-Trunk member is 32768.

   The master and backup devices in an E-Trunk must use the same LACP priority.