E-Trunk packets are sent with the source IP address and protocol port number configured on the local device. When you change the local or remote IP address on a device, you must change the corresponding address on the remote device. Otherwise, E-Trunk packets are dropped.
The system view is displayed.
The E-Trunk view is displayed.
The local and remote IP addresses of the E-Trunk are configured.
The remote IP address of the local device must be the same as the local IP address of the remote device. For example, when an E-Trunk is created between device A and device B and the local and remote IP addresses on device A are 10.1.1.1 and 10.2.2.2 respectively, the local and remote IP addresses on device B must be 10.2.2.2 and 10.1.1.1 respectively.