Verifying the Basic IGMP Snooping Function Configuration

Run the following commands in any view to check IGMP snooping configurations and forwarding entries.

Run the display igmp-snooping [ vlan [ vlan-id ] ] configuration command to check the IGMP snooping configuration in a VLAN.
Run the display igmp-snooping [ vlan [ vlan-id ] ] command to check all the IGMP snooping running parameters in a VLAN.
Run the display igmp-snooping port-info [ vlan vlan-id [ group-address group-address ] ] [ verbose ] command to check member ports of a multicast group.
Run the display igmp-snooping host-tracking [ vlan vlan-id [ group-address group-address ] ] [ interface { interface-type interface number } ] command to check information about group member hosts.
Run the display igmp-snooping router-port vlan [ vlan-id ] command to check router ports.
Run the display l2-multicast forwarding-table vlan [ vlan-id ] [ [ source-address source-address ] group-address { group-address | router-group } ] command to check the Layer 2 multicast forwarding table in a VLAN.
Run the display l2-multicast forwarding-mode vlan [ vlan-id ] command to check the Layer 2 multicast data forwarding mode in the VLAN.
Run the display igmp-snooping querier vlan [ vlan-id ] command to check the IGMP snooping querier configuration.