Configuring the Device to Output Logs to the Console

Context

After logs are output to the console, you can view logs on the console (host from which you can log in to the device through the console interface) to monitor device running.

Procedure

Run system-view
The system view is displayed.
Run info-center console channel { channel-number | channel-name }
A channel through which logs are output to the console is specified.

By default, the device uses channel 0 to output logs to the console.
Run info-center source { module-name | default } channel { channel-number | channel-name } log { state { off | on } | level severity } ^*
A rule for outputting logs to a channel is set.

By default, channel 0 is enabled to output logs and the lowest log severity is warning.
Run quit
Return to the user view.
Run terminal monitor
Display of logs, traps, and debugging message output is enabled on the user terminal.

By default, console display is enabled and terminal display is disabled.
Run terminal logging
Log display is enabled on the user terminal.

By default, log display is enabled on the user terminal.