Configuring the Device to Output Logs to a Terminal

Context

After logs are output to a user terminal, you can view logs on the user terminal (host from which you log in to the device through Telnet) to monitor device running.

Procedure

Run system-view
The system view is displayed.
Run info-center monitor channel { channel-number | channel-name }
A channel through which logs are output to a user terminal is specified.

By default, the switch uses channel 1 to output logs to a user terminal.
Run info-center source { module-name | default } channel { channel-number | channel-name } log { state { off | on } | level severity } ^*
A rule for outputting logs to a channel is set.

By default, channel 1 is enabled to output logs and the lowest log severity is warning.
Run quit
Return to the user view.
Run terminal monitor
Display of logs, traps, and debugging message output is enabled on the user terminal.

By default, console display is enabled and terminal display is disabled.
Run terminal logging
Log display is enabled on the user terminal.

By default, log display is enabled on the user terminal.