Configuring the MPLS Function

Procedure

1. Run system-view

   The system view is displayed.

2. Run mpls lsr-id lsr-id

   An LSR ID is specified.

3. Run mpls

   MPLS is enabled and the MPLS view is displayed.

4. Run quit

   Return to the system view.

5. Run mpls ldp

   LDP is enabled.

6. Run quit

   Return to the system view.

7. Run interface interface-type interface-number

   The IPv4 network-side interface view is displayed.

8. Run mpls

   MPLS is enabled on the interface.

9. Run mpls ldp

   MPLS LDP is enabled on the interface.