Prerequisites
The configurations of the dynamic BFD for LDP LSP function are complete.
Procedure
- Run the display bfd configuration all [ verbose ] command to check the BFD configuration (ingress).
- Run the display bfd configuration passive-dynamic [ peer-ip peer-ip remote-discriminator discriminator ] [ verbose ] command to check the BFD configuration (egress).
- Run the display bfd session all [ verbose ] command to check information about the BFD session (ingress).
- Run the display bfd session passive-dynamic [ peer-ip peer-ip remote-discriminator discriminator ] [ verbose ] command to check information about the BFD established passively (egress).
- Run the display mpls bfd session [ statistics | protocol ldp | outgoing-interface interface-type interface-number | nexthop ip-address | fec fec-address | verbose | monitor ] command to check information about MPLS BFD session (ingress).