Enabling MPLS TE

Procedure

1. Run system-view

   The system view is displayed.

2. Run mpls

   The MPLS view is displayed.

3. Run mpls te

   MPLS TE is enabled on the node globally.

4. Run quit

   Return to the system view.

5. Run interface interface-type interface-number

   The view of the interface is displayed.

6. (Optional) On an Ethernet interface, run undo portswitch

   The interface is switched to Layer 3 mode.

   By default, an Ethernet interface works in Layer 2 mode.

   

   Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support switching between Layer 2 and Layer 3 modes.

7. Run mpls

   The MPLS is enabled on the interface.

8. Run mpls te

   The MPLS TE is enabled on the interface.