< Home

Configuring a Static MPLS TE Tunnel

Configuring a static MPLS TE tunnel can implement setup of static CR-LSPs. The configuration is simple. Labels are allocated manually and control packets do not need to be exchanged, so static LSPs consume less resources.

Pre-configuration Tasks

Before configuring a static MPLS TE tunnel, complete the following tasks:

  • Configure an LSR ID on each LSR.

  • Enable basic MPLS functions on each LSR globally and on each interface.

After a static CR-LSP is bound to a tunnel interface, the static CR-LSP takes effect without an IP route configured.

Configuration Procedure

Except that configuring link bandwidth is optional, all the other configurations are mandatory.

Parent Topic: MPLS TE Configuration
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >