Verifying the Configuration of a Static MPLS TE Tunnel

Procedure

• Run the display mpls static-cr-lsp [ lsp-name ] [ { include | exclude } ip-address mask-length ] [ verbose ] command to check information about the static CR-LSP.
• Run the display mpls te tunnel [ destination ip-address ] [ lsp-id ingress-lsr-id session-id local-lsp-id ] [ lsr-role { all | egress | ingress | remote | transit } ] [ name tunnel-name ] [ { incoming-interface | interface | outgoing-interface } interface-type interface-number ] [ verbose ] command to check tunnel information.
• Run the display mpls te tunnel statistics or display mpls lsp statistics command to check the tunnel statistics.
• Run the display mpls te tunnel-interface [ tunnel interface-number ] command to check information about the tunnel interface on the ingress node.