Deleting IPv6 Multicast Forwarding Entries and IPv6 Routing Entries
Context
After confirming that IPv6 multicast forwarding entries and IPv6 routing entries can be deleted, run the reset commands in the user view to delete the entries.
After you run the reset command to clear information in the IPv6 multicast forwarding table or in the IPv6 multicast routing table, multicast data cannot be normally transmitted. Exercise caution when you run this command.
Procedure
- Run either of the following commands in
the user view to delete entries from the IPv6 multicast forwarding
table:
reset multicast ipv6 forwarding-table all
reset multicast ipv6 forwarding-table { ipv6-group-address [ ipv6-group-mask-length ] | ipv6-source-address [ ipv6-source-mask-length ] | incoming-interface { interface-type interface-number | register } } *
- Run either of the following commands in
the user view to delete entries from the IPv6 multicast routing table:
reset multicast ipv6 routing-table all
reset multicast ipv6 routing-table { ipv6-group-address [ ipv6-group-mask-length ] | ipv6-source-address [ ipv6-source-mask-length ] | incoming-interface { interface-type interface-number | register } } *