Monitoring IPv6 Multicast Routing and Forwarding

During routine maintenance, run the following commands in any view to check the running status of the IPv6 multicast forwarding and routing tables.

Run the display multicast ipv6 boundary [ ipv6-group-address ipv6-group-mask-length | scope scope-id ] [ interface interface-type interface-number ] command to check information about the IPv6 multicast boundary configured on an interface.
Run the display multicast ipv6 forwarding-table [ ipv6-source-address [ ipv6-source-mask-length ] | ipv6-group-address [ ipv6-group-mask-length ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { { exclude | include | match } { interface-type interface-number | register | none } } | { statistics | verbose } ] ^* command to check the IPv6 multicast forwarding table.
Run the display multicast ipv6 routing-table [ ipv6-source-address [ ipv6-source-mask-length ] | ipv6-group-address [ ipv6-group-mask-length ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { { exclude | include | match } { interface-type interface-number | register | none } } ] ^* [ outgoing-interface-number [ number ] ] command to check the IPv6 multicast routing table.
Run the display multicast ipv6 rpf-info ipv6-source-address [ ipv6-group-address ] [ rpt | spt ] command to check the Reverse Path Forwarding (RPF) route.