Verifying the Portal Authentication Configuration

Procedure

• When an external Portal server is used, run the following commands to check the configuration.
  • Run the display portal [ interface vlanif interface-number ] command to check the Portal authentication configuration on the VLANIF interface.
  • Run the display web-auth-server configuration command to check the configuration of the Portal authentication server.
  • Run the display server-detect state [ web-auth-server server-name ] command to check the status of a Portal server.
  • Run the display user-group [ group-name ] command to check the user group configuration.
  • Run the display access-user user-group group-name command to check summary information about online users in a user group.
  • Run the display static-user [ domain-name domain-name | interface interface-type interface-number | ip-address start-ip-address [ end-ip-address ] | vpn-instance vpn-instance-name ] ^* command to check the static user information.
  • Run the display portal quiet-user { all | server-ip ip-address | user-ip ip-address } command to check information about Portal authentication users in quiet state.
  • Run the display portal user-logout [ ip-address ip-address [ vpn-instance vpn-instance-name ] ] command to check the temporary logout entries of Portal authentication users.
  • Run the display aaa statistics access-type-authenreq command to display the number of authentication requests.

• When a built-in Portal server is used, run the following commands to check the configuration.
  • Run the display portal local-server command to check the configuration of a built-in Portal server.
  • Run the display portal local-server connect [ user-ip ip-address ] command to check the connection status of Portal authentication users on the built-in Portal server.
  • Run the display static-user [ domain-name domain-name | interface interface-type interface-number | ip-address start-ip-address [ end-ip-address ] | vpn-instance vpn-instance-name ] ^* command to check the static user information.
  • Run the display portal quiet-user { all | server-ip ip-address | user-ip ip-address } command to check information about Portal authentication users in quiet state.
  • Run the display portal local-server page-information command to check the page files loaded to the memory of a built-in Portal server.

• Run the display portal free-rule [ rule-id ] command to check authentication-free rules for Portal authentication users.
• Run the display url-template { all | name template-name } command to check the configuration of the URL profile.
• Run the display port connection-type access all command to check all current downlink interfaces on the device.