Configuring NetStream Sampling

Context

You can set the intervals for sampling packets so that only statistics of sampled packets are collected. The statistics show the flow status on the entire network. The sampling function reduces the impact of NetStream on device performance.

Procedure

Run the system-view command to enter the system view.
Run the interface interface-type interface-number command to enter the interface view.
Run the ip netstream sampler fix-packets packet-interval { inbound | outbound } command to configure IPv4 packet sampling on the interface.
By default, an interface uses the packet-based regular sampling and the sampling ratio is 1000.
Run the ipv6 netstream sampler fix-packets packet-interval { inbound | outbound } command to configure IPv6 packet sampling on the interface.
By default, an interface uses the packet-based regular sampling and the sampling ratio is 1000.