Configuring the NQA Client to Send Traps When a Test Fails

Path jitter test test does not support the traps for test failures.

Run system-view
The system view is displayed.
Run nqa test-instance admin-name test-name
The NQA view is displayed.
Run send-trap testfailure
The NQA client is configured to send traps when the test fails.

By default, the NQA client sends no trap when an NQA test fails.
Run test-failtimes times
The threshold on the traps sent after the NQA test fails is configured. The threshold specifies the maximum number of continuous test failures for the NQA test instance.

By default, a trap is sent for each test failure.