Configuring the NQA Client to Send Traps When a Probe Fails

Procedure

1. Run system-view

   The system view is displayed.

2. Run nqa test-instance admin-name test-name

   The NQA view is displayed.

3. Run send-trap probefailure

   The NQA client is configured to send traps when a probe fails.

   By default, the NQA client sends no trap when a probe fails.

4. Run probe-failtimes times

   The threshold on the traps sent after the probe fails is configured. The threshold specifies the maximum number of continuous probe failures for the NQA test instance.

   By default, a trap is sent for each probe failure.