Setting a Priority for OSPF Routes

Procedure

1. Run system-view

   The system view is displayed.

2. Run ospf [ process-id ]

   The OSPF process view is displayed.

3. Run preference [ ase ] { preference | route-policy route-policy-name } ^*

   A priority is set for OSPF routes.

   • The parameter ase indicates that a priority is set for AS external routes.
   • The parameter preference specifies the priority of OSPF routes. A smaller value indicates a higher priority.
   • The parameter route-policy route-policy-name indicates that a routing policy is used to set a priority for specified routes.

   The default priority of OSPF routes is 10. If the parameter ase is specified in the command, the default priority of AS external routes is 150.