Configuring an LSA Transmission Delay on an Interface

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface interface-type interface-number

   The OSPF interface view is displayed.

3. (Optional) On an Ethernet interface, run undo portswitch

   The interface is switched to Layer 3 mode.

   By default, an Ethernet interface works in Layer 2 mode.

   

   Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support switching between Layer 2 and Layer 3 modes.

4. Run ospf trans-delay interval

   A delay after which LSAs can be transmitted is set on the interface.

   By default, the delay is 1s.