Verifying the Configuration of IPv6 PIM-SM in the ASM Model

Procedure

• Run the display pim ipv6 bsr-info command to check the BSR configuration.
• Run the display pim ipv6 rp-info [ ipv6-group-address ] command to check the RP configuration.
• Run the display pim ipv6 interface [ interface-type interface-number | up | down ] [ verbose ] command to check IPv6 PIM information on an interface.
• Run the display pim ipv6 neighbor [ ipv6-link-local-address | interface interface-type interface-number | verbose ] ^* command to check information about IPv6 PIM neighbors.
• Run the following commands to check the IPv6 PIM routing table.
  • display pim ipv6 routing-table [ ipv6-source-address [ mask mask-length ] | ipv6-group-address [ mask mask-length ] | flags flag-value | fsm | incoming-interface { interface-type interface-number | register } | mode { dm | sm | ssm } | outgoing-interface { exclude | include | match } { interface-type interface-number | none | register } ] ^* [ outgoing-interface-number [ number ] ]

  • display pim ipv6 routing-table brief [ ipv6-source-address [ mask mask-length ] | ipv6-group-address [ mask mask-length ] | incoming-interface { interface-type interface-number | register } ] ^*