< Home

Configuring IPv6 PIM-SM in the ASM Model

Context

When unicast routes on an IPv6 are reachable, you can implement IPv6 PIM-SM in the ASM model by:
  • Enabling IPv6 multicast routing on each device
  • Enabling IPv6 PIM-SM on each interface
  • Configuring an RP on the network

Pre-configuration Tasks

Before configuring IPv6 PIM-SM in the ASM model, configure an IPv6 unicast routing protocol to ensure that unicast routes on the network are reachable.

Configuration Procedure

The mandatory steps for configuring IPv6 PIM-SM in the ASM model are:

  1. Enable IPv6 PIM-SM.
  2. Configure a rendezvous point (RP).

Other configuration tasks are optional.

Parent Topic: Configuring IPv6 PIM-SM
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >