Verifying the Configuration of Static VLLs to Access a VPLS Network

Procedure

• Run the display mpls static-l2vc [ interface interface-type interface-number ] command to check information about the static VC configured on the switch.
• Run the display l2vpn ccc-interface vc-type static-vc up command to check information about VC interfaces in SVC mode in Up state.
• Run the display vsi [ name vsi-name ] [ verbose ] command to check information about a VPLS VSI.
• Run the display vsi name vsi-name statistics command to check information about VSI statistics, including the PW and AC status.
• Run the display vsi remote ldp [ router-id ip-address ] [ pw-id pw-id ] command to check information about a remote VSI.
• Run the display vpls connection [ ldp | vsi vsi-name ] [ down | up ] [ verbose ] command to check information about a VPLS connection.
• Run the display mac-address dynamic slot-id command to check dynamic MAC address entries.