< Home

Configuring Static VLLs to Access a VPLS Network

Pre-configuration Task

Before configuring static VLLs to access a VPLS network, complete the following tasks:

  • Configure the IGP on Ps and SPEs on the MPLS backbone network to implement IP connectivity.

  • Implement the connectivity between SPEs on the VPLS fully-connected network.

  • Enable MPLS L2VPN on the interfaces connecting UPEs and SPEs.

When VPN services need to be transmitted over a specified TE tunnel or when load balancing needs to be performed among multiple tunnels to fully use network resources, tunnel policies need to be applied to VPNs.

Configuration Procedure

To configure static VLLs to access a VPLS network, configure the UPE and SPE.

  • Configuring the UPE

    1. Configuring static LSPs between UPEs and SPEs
    2. Configuring a UPE to access an SPE through a static VLL

  • Configuring the SPE

    1. Configuring static LSPs between UPEs and SPEs
    2. Binding a static VLL to a VSI on an SPE
Parent Topic: VPLS Configuration
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >