<
Home
Configuring CE Dual-Homed Kompella VPLS
Pre-configuration Task
Before configuring CE Dual-Homed Kompella VPLS, complete the following tasks:
Configure LSR IDs and enable MPLS on PEs and Ps.
Enable MPLS L2VPN on PEs.
Establish tunnels between PEs for data transmission.
Configuration Procedure
To configure CE Dual-Homed Kompella VPLS, perform the following configurations on the PE.
Creating VSIs and Configuring the BGP Signaling
Configuring the Multi-Homed Preference for a VSI
Binding VSIs to AC Interfaces
Verifying the Configuration of CE Dual-Homed Kompella VPLS