Binding VAP Profiles

Context

After the configuration in a VAP profile is complete, you need to bind the VAP profile to an AP group, AP, AP radio, or AP group radio. After being delivered to APs, the configuration in the VAP profile can take effect on the APs.

After a VAP profile is bound to an AP group or AP, the parameter settings in the profile take effect on all radios of the AP group or AP. After a radio profile is bound to an AP group radio or AP radio, the parameter settings in the profile take effect on the specified radio of the AP or AP group.

Procedure

Bind a VAP profile to an AP group.
1. Run the system-view command to enter the system view.
2. Run the wlan command to enter the WLAN view.
3. Run the ap-group name group-name command to enter the AP group view.
4. Run the vap-profile profile-name wlan wlan-id { radio { radio-id | all } } command to bind a VAP profile to radios.
  By default, no VAP profile is bound to a radio.
Bind a VAP profile to an AP.
1. Run the system-view command to enter the system view.
2. Run the wlan command to enter the WLAN view.
3. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
4. Run the vap-profile profile-name wlan wlan-id { radio { radio-id | all } } command to bind a VAP profile to radios.
  By default, no VAP profile is bound to a radio.
Bind a VAP profile to an AP group radio.
1. Run the system-view command to enter the system view.
2. Run the wlan command to enter the WLAN view.
3. Run the ap-group name group-name command to enter the AP group view.
4. Run the radio radio-id command to enter the radio view.
5. Run the vap-profile profile-name wlan wlan-id command to bind a VAP profile to the radio.
  By default, no VAP profile is bound to a radio.
Bind a VAP profile to an AP radio.
1. Run the system-view command to enter the system view.
2. Run the wlan command to enter the WLAN view.
3. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
4. Run the radio radio-id command to enter the radio view.
5. Run the vap-profile profile-name wlan wlan-id command to bind a VAP profile to the radio.
  By default, no VAP profile is bound to a radio.
Bind a VAP profile to all AP groups in a batch.
1. Run the system-view command to enter the system view.
2. Run the wlan command to enter the WLAN view.
3. Run the ap-group all vap-profile profile-name wlan wlan-id radio { radio-id | all } command to bind a VAP profile to all AP groups.
  By default, no VAP profile is bound to radios of an AP group.