<
Home
Verifying the VAP, Security, and SSID Profile Configuration
Prerequisites
The configuration of the VAP, security, and SSID profiles is complete.
Procedure
Run the
display vap
{
all
|
ssid
ssid
}
or
display vap
{
ap-group
ap-group-name
| {
ap-name
ap-name
|
ap-id
ap-id
} [
radio
radio-id
] } [
ssid
ssid
]
command to check service VAP information.
Run the
display vap-profile
{
all
|
name
profile-name
} command to check configuration and reference information about a VAP profile.
Run the
display references vap-profile
name
profile-name
command to check reference information about a VAP profile.
Run the
display security-profile
{
all
|
name
profile-name
} command to check configuration and reference information about a security profile.
Run the
display references security-profile
name
profile-name
command to check reference information about a security profile.
Run the
display ssid-profile
{
all
|
name
profile-name
} command to check configuration and reference information about an SSID profile.
Run the
display references ssid-profile
name
profile-name
command to check reference information about an SSID profile.
Run the
display vlan pool
{
name
pool-name
|
all
[
verbose
] } command to check configurations in a VLAN pool.
Run the
display references vlan pool
pool-name
command to check reference information about a VLAN pool.
Run the
display vap create-fail-record all
command to check records about VAP creation failures.
Run the
display softgre-profile
{
all
|
name
profile-name
} command to check configuration and reference information about a soft GRE profile.
Run the
display references softgre-profile
name
profile-name
command to check reference information about a soft GRE profile.
Run the
display softgre-tunnel-status
{
ap-name
ap-name
|
ap-id
ap-id
} command to check soft GRE tunnel information of a specified AP.
Run the
display wlan config-errors
command to check WLAN configuration errors.