Configuring Sampling Parameter on an AP

Context

Within each sampling interval, an AP collects desired statistics based on APs, radios, and STAs (when the AP collects data based on STAs, it collects only data displayed by the display command). Within each statistics collection interval, the AP computes the average of sampled values and reports results to the AC. You can view all statistics collected by the AP on the AC.

Procedure

Run system-view
The system view is displayed.
Run wlan
The WLAN view is displayed.
Run ap-system-profile name profile-name
An AP system profile is created, and the AP system profile view is displayed.

By default, the system provides the AP system profile default.
Run sample-time sample-time
The sampling interval is configured for an AP.

The default sampling interval of an AP is 30s.
Run quit
Return to the WLAN view.
Bind an AP system profile to an AP group or AP.
- Binding an AP system profile to an AP group.
  1. Run the ap-group name group-name command to enter the AP group view.
  2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.
    
    By default, the AP system profile default is bound to an AP group.
- Binding an AP system profile to an AP.
  1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
  2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.
    
    By default, no AP system profile is bound to an AP.