Configuring an AP to Report Information About Its LLDP Neighbors

Context

After the AP discovers a neighbor, the AP sends neighbor information to the AC. The NMS then obtains AP's LLDP information from the AC to learn the network topology.

Procedure

Run system-view
The system view is displayed.
Run wlan
The WLAN view is displayed.
Run ap-system-profile name profile-name
An AP system profile is created, and the AP system profile view is displayed.

By default, the system provides the AP system profile default.
Run lldp report enable
The AP is enabled to report information about its LLDP neighbors.

By default, an AP does not report information about its LLDP neighbors.
(Optional) Run lldp report-interval interval-time
The interval at which the AP reports neighbor information to an AC is configured.

By default, an AP reports LLDP neighbor information to an AC at an interval of 30 seconds.
Run quit
Return to the WLAN view.
Bind an AP system profile to an AP group or AP.
- Binding an AP system profile to an AP group.
  1. Run the ap-group name group-name command to enter the AP group view.
  2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.
    
    By default, the AP system profile default is bound to an AP group.
- Binding an AP system profile to an AP.
  1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
  2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.
    
    By default, no AP system profile is bound to an AP.