After the working mode of an AP's wired interface and the
PoE function of a PSE have been configured, run the following commands
to check the configuration:
Procedure
Run the display wired-port-profile { all | nameprofile-name } command to check configuration and reference information about
an AP wired port profile.
Run the display port-link-profile { all | nameprofile-name } command to check configuration and reference information about
an AP wired port link profile.
Run the display ap-system-profile { all | nameprofile-name } command to check configuration and reference information about
an AP system profile.
Run the display references wired-port-profilenameprofile-name command to check
reference information about an AP wired port profile.
Run the display references port-link-profilenameprofile-name command to check
reference information about an AP wired port link profile.
Run the display references ap-system-profilenameprofile-name command to check
reference information about an AP system profile.