Applying Profiles

Context

After the configuration is complete, apply profiles to an AP group or AP so that the configuration can be automatically delivered to specific APs and takes effect.

Procedure

Run system-view
The system view is displayed.
Run wlan
The WLAN view is displayed.
Run wired-port-profile name profile-name
The AP wired port profile view is displayed.
Run port-link-profile profile-name
The AP wired port link profile is bound to the AP wired port profile.

By default, the AP wired port link profile default is bound to an AP wired port profile.
Run quit
Return to the WLAN view.
Apply the AP wired port profile and AP system profile.
- Binding the AP wired port profile and AP system profile to an AP group
  1. Run the ap-group name group-name command to enter the AP group view.
  2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.
    
    By default, the AP system profile default is bound to an AP group.
  3. Run the wired-port-profile profile-name interface-type interface-number command to bind the AP wired port profile to the AP group.
    
    By default, the AP wired port profile default is bound to an AP group.
- Binding the AP wired port profile and AP system profile to an AP
  1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
  2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.
    
    By default, no AP system profile is bound to an AP.
  3. Run the wired-port-profile profile-name interface-type interface-number command to bind the AP wired port profile to the AP.
    
    By default, no AP wired port profile is bound to an AP.