< Home

(Optional) Configuring the Device to Forcibly Disconnect STAs Without Traffic

Context

After the device is enabled to monitor user traffic and forcibly disconnect STAs without traffic, a STA meeting all the following conditions is forcibly disconnected after reassociation and going online:
  • The STA does not send DHCP Request messages or receive ARP Reply packets within 5s after going online.
  • The IP address of the STA changes after roaming.
  • The STA has only uplink traffic but no downlink traffic.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan

    The WLAN view is displayed.

  3. Run undo sta-network-detect disable

    The device is enabled to monitor user traffic and forcibly disconnect STAs without traffic.

    By default, the device is enabled to monitor user traffic and forcibly disconnect STAs without traffic.

Parent Topic: Configuring a VAP
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >