Configuring Roaming Between APs in the Same Service VLAN

If neighboring APs have the same service VLAN, configure roaming between the APs in the same service VLAN. After the configuration, services are not interrupted when an STA moves from an AP to another AP in the same service VLAN.

Pre-configuration Tasks

Before configuring roaming between APs in the same service VLAN, complete the following tasks:

• Perform the task of WLAN Service Configuration Guide.
• Perform the following operations for each AP involved in roaming:
  • Associate the APs to the same AC.
  • Configure the same security policy.
  • Set the same SSID.
  • Configure the same service VLAN.

Configuration Procedure

You can perform the following operations in any sequence based on the site requirements: