Applying the Configuration to an AP Group or a Specific AP

Procedure

1. Run system-view

   The system view is displayed.

2. Run wlan

   The WLAN view is displayed.

3. Bind the VAP profile to radios of an AP group or a specific AP.
   

   This step is optional when a radio works in monitor mode. When a radio works in monitor mode, the device automatically checks whether the radio has a VAP bound. If not, the device automatically creates a VAP and binds it to the radio to ensure normal scanning.
   1. Run the vap-profile name profile-name command to create a VAP profile.

      By default, the system provides the VAP profile default.

      

      When a VAP profile exists in the system, you can use the existing one or create a new one.

   2. Run the quit command to return to the WLAN view.
   3. Bind the VAP profile to radios of an AP group or a specific AP as required to make the radios properly work. For details, see Binding VAP Profiles.
   4. Run the quit command to return to the WLAN view.

4. Bind a WIDS profile to an AP group or a specific AP.
   • Binding a WIDS profile to an AP group.
     1. Run the ap-group name group-name command to enter the AP group view.

     2. Run the wids-profile profile-name command to bind the WIDS profile to a radio in an AP group.

        By default, the WIDS profile default is bound to an AP group.

   • Binding a WIDS profile to a specific AP.
     1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.

     2. Run the wids-profile profile-name command to bind the WIDS profile to a radio of a specific AP.

        By default, no WIDS profile is bound to a specific AP.