Table 1 lists the default settings for IPv6 PIM.
| Parameter | Default Setting |
|---|---|
IPv6 Multicast routing |
Disabled |
IPv6 PIM-DM |
Disabled |
State refresh |
Enabled after IPv6 PIM-DM is enabled |
IPv6 PIM-SM |
Disabled |
Static RP address |
Unspecified |
C-RP interface |
Unspecified |
C-BSR interface |
Unspecified |
Embedded RP |
Enabled after IPv6 PIM-SM is enabled (The switch parses IPv6 multicast addresses FF7x::/12, where x is 0 or any value ranging from 3 to F.) |
DR priority |
1 |
SPT switchover conditions |
First multicast packet received by the RP or the DR at the member side |
Range of IPv6 SSM group addresses |
FF3x::/32 (x is not 1 or 2) |
IPv6 PIM GR |
Disabled |
IPv6 PIM silent |
Disabled |