Configuring VXLAN in Centralized Gateway Mode Using BGP EVPN
Pre-configuration Tasks
Before configuring user communication over VXLAN tunnels, ensure route reachability.
Configuration Process
Figure 1 shows the flowchart of configuring VXLAN in centralized gateway mode.
Configuration Task |
IPv4 Overlay Network |
IPv6 Overlay Network |
|---|---|---|
(Optional) Configuring ARP Broadcast Suppression |
Supported |
Not supported |
(Optional) Configuring NS Multicast Suppression |
Not supported |
Supported |
(Optional) Configuring Isolation on the Access Side |
Supported |
Supported |
(Optional) Configuring Unidirectional Isolation from the Access Side to the Tunnel Side |
Supported |
Supported |
(Optional) Configuring the Local Proxy ARP Function |
Supported |
Not supported |
(Optional) Configuring the Routed Proxy ND Function |
Not supported |
Supported |
(Optional) Configuring the Local Proxy ND Function |
Not supported |
Supported |
(Optional) Configuring Traffic Suppression in a BD |
Supported |
Supported |
(Optional) Configuring a Static MAC Address Entry |
Supported |
Supported |
(Optional) Configuring a Static ARP Entry |
Supported |
Not supported |
(Optional) Configuring a Static IPv6 Neighbor Entry |
Not supported |
Supported |