2-Pin DC Power Cable (Phoenix Connector)

Appearance and Structure

Figure 1 shows the appearance and structure of the 2-pin DC power cable and the Phoenix connector.

Figure 1 Structure of a 2-pin DC power cable and Phoenix connector

Specifications

Table 1 lists the specifications of the 2-pin DC power cable.

**Table 1** Specifications of a 2-pin DC power cable
Minimum Conductor Cross-Sectional Area (for the Power Cable Delivered with the Switch)	Maximum Conductor Cross-Sectional Area
0.75 mm² or 18 AWG	3 mm² or 12 AWG

Connection

One end of the 2-pin DC power cable is used with the Phoenix connector and connected to the DC input port of the S5720I-SI. The other end needs to be made onsite. You can make the power cables according to site requirements and connect the cables to the DC power supply system.