License Alarms Are Generated on a Device
If a license alarm is generated, handle the alarm based on Table 1.
Table 1 Possible causes and solutions for handling a license alarm
| License Alarm Message |
Possible Cause |
Solution |
| GTL/2/DEFAULTVALUE:OID [OID] Current license value is default,
the reason is [reason]. |
The authentication of the license file failed. |
- Check whether the license file name entered when you activate
the license is correct. If not, enter the correct license file name
and activate the license again.
- Collect alarm information and configuration information, and then contact technical support personnel.
|
| GTL/2/RESOURCE_USEDUP:OID [OID] Resource item [item-name] is
nearly used up. |
The usage percentage of service resources reached or exceeded
the threshold defined by the license. |
- Apply for a new license file with sufficient resources.
- Run the license active file-name command to activate
the new license file.
|
| GTL/2/NEARDEADLINE:OID [OID] License feature [item-name] is
near deadline, remain time is [date] days. |
The license was approaching the deadline and soon would become
invalid. |
- Apply for a new license file before the deadline.
- Run the license active file-name command to activate
the new license file.
|
| GTL/2/GTL_ESN_MISMATCH:OID [OID] The ESN of slot [slot] mismatched
with the license file. |
The ESN in the license file was different from the ESN of the
card. |
- Run the license revoke command to obtain the revoke ticket
of the license.
- Run the display esn command to collect the ESN information.
- Apply for a new license by using the revoke ticket and ESN.
- Run the license active file-name command to activate
the new license file.
|