Local User

Procedure

• Create a local user.
  1. Choose Configuration > Security Services > AAA and click the Local User tab, as shown in Figure 1.
     Figure 1 Local user
     
     

  2. Click Create to open the Create User page, as shown in Figure 2.
     Figure 2 Create User page
     
     
     Table 1 describes the parameters on the page.

     Table 1 Parameters for creating a user

     Parameter	Description
     User name	Local user name.
     Password	User password.
     Expiration time	Password validity period.
     User type	User type. Users at different levels have different access rights.
     User status	State of a local user. Activate: The device accepts and processes the authentication request from the user. Block: The device rejects the authentication request from the user. NOTE: If a user has established a connection with the device, when the user is set in blocking state, the connection still takes effect but the device rejects subsequent authentication requests from the user.
     Access mode	Access type. After you specify the access type of a user, only the users of the specified access type can log in.

  3. Set parameters for the local user.
  4. Click OK.
• Modify a local user.
  1. Choose Configuration > Security Services > AAA and click the Local User tab.
  2. Click the name of the user that you want to modify.
  3. Set parameters for modifying the user. Indicates whether a user is forcibly disconnected from the network. Table 1 describes the parameters for modifying a local user.
  4. Click OK.
• Delete a local user.
  1. Choose Configuration > Security Services > AAA and click the Local User tab.
  2. Select a record that you want to delete and click Delete. The system asks you whether to delete the record.
     

     • To select a record, click the checkbox of the record.
     • To delete records in batches, click the checkboxes of records.

  3. Click OK.