Free Mobility

Procedure

1. Choose Configuration > Security Services > AAA and click the Free Mobility tab.
2. Set Free mobility status to ON to open the Free Mobility page, as shown in Figure 1.
   Figure 1 Enable Free Mobility
   
   
   Table 1 describes the parameters on the page.

   Table 1 Parameters for enabling Free Mobility

   Item	Description
   Free mobility status	Enables Free mobility: ON OFF
   Controller server IP	Configures an IP address for the primary controller.
   Backup controller server IP	Configures an IP address for the backup controller.
   Connection password	Configures the password used by the device to set up a connection with the controller. The value is a string of 8 to 32 characters.
   Confirm connection password	Confirms the password used by the device to set up a connection with the controller.
   Source IP address	Specifies the source IP address for the communication between switch and controller.

3. Configure the parameters.
4. Click Apply.
5. In the dialog box that is displayed, click OK.