IPSG

Procedure

1. Choose Configuration > Security Services > IP Security and click the IPSG tab, as shown in Figure 1.
   Figure 1 IPSG Configuration
   
   

2. Select a port to be configured. Perform the following operations as required in the port area:
   • Click a port icon. To deselect the port, click the port icon again.
   • Drag the cursor to select consecutive ports in a batch.
   • Click multiple port icons to select these ports, and click a port icon again to deselect the port.
   • Select a slot where a panel is located. All ports on the panel are selected.

3. Turn on IPSG status.
4. Select an IP packet check item from IPSG matching option.
5. Click Apply to complete the configuration.