Static Binding Table

Procedure

• Create a static binding entry.
  1. Choose Configuration > Security Services > IP Security and click the Static Binding Table tab, as shown in Figure 1.
     Figure 1 Static Binding Table
     
     

  2. Click Create to open the Create a Binging Entry page, as shown in Figure 2.
     Figure 2 Create a Binging Entry
     
     
     Table 1 describes parameters on the displayed page.

     Table 1 Create a Binging Entry

     Parameter	Description
     Interface name	Indicates the interface connected to user.
     VLAN ID	Specifies the ID of a user VLAN. The value ranges from 1 to 4094.
     MAC address	Indicates the MAC address of a user.
     IP address	Specifies the static IP address of a user.

  3. Set the required parameters.
  4. Click OK.
• Delete a static binding entry.
  1. Choose Configuration > Security Services > IP Security and click the Static Binding Table tab, as shown in Figure 1.
  2. Select a record that you want to delete and click Delete. The system asks you whether to delete the record.
  3. Click OK.