Certificate Mgmt (NETCONF Mode)

Procedure

1. Choose Maintenance > System Maintenance > Certificate Mgmt to open the Certificate Mgmt page, as shown in Figure 1.
   Figure 1 Certificate Mgmt
   
   

   Table 1 describes parameters on the Certificate Mgmt page.

   Table 1 Certificate Mgmt

   Parameter	Description
   Upload and Load CA Certificate
   Load a CA certificate file	Specifies a CA certificate to be imported. For example, when the switch functions as an SSL agent, it can have an SSL agent CA certificate imported and use the private key of this certificate to sign the SSL client certificate again.
   Upload and Load Local Certificate
   Set an encryption key	Specifies an encryption password for an RSA key pair file.
   Load a local certificate file	Specifies a local certificate to be imported.
   Current Certificate Information	Displays Certificate Status, Certificate Version, and Certificate Serial Number of the CA certificate and local certificate.

2. Click in Load a CA certificate file and select a CA certificate file to be loaded.
3. Click Load to upload the CA certificate file.
4. Configure an encryption password, and click in Load a local certificate file to select a local certificate file to be loaded, and click Load.
5. Check the CA certificate and local certificate in Current Certificate Information.